Htc KII0160 User Manual download pdf (Page 140)

140 Getting Connected

Note If you want only to connect directly to another device or computer, and

not to a network through an access point, select This is a device to

device (ad-hoc) connection.

3. Select the Authentication type and Data encryption, then select

Default settings are:

Authentication

= Open ; Data Encryption = WEP

For TKIP, AES, or WEP data encryption, enter the needed information

in the remaining ﬁelds, then select Next

4. Select Use IEEE 802.1x network access control to use Extensible

Authentication Protocol (EAP). Select the EAP type

depending on the

type of authentication. Select Finish

To increase security on the Wi-Fi network

The LEAP (Lightweight Extensible Authentication Protocol) feature of

Comm Manager helps increase security on your phone, and ensures that

nobody is able to access your network without your permission.

1. On the Wi-Fi Settings screen, select LEAP.

2. Select Menu > New.

Note By default, the LEAP screen displays data that you entered previously.

However, you can modify or delete the data as required by selecting

Menu > Modify

or Menu > Delete on the LEAP screen.

3. Enter the SSID (Service Set Identiﬁer).

You can obtain this information from T-Mobile.

4. Enter the user name, password, and domain.

5. Select an Authentication Type. By default, the Authentication Type

for your phone is Open System authentication.

Note For LEAP to work correctly, the receiving phone (your phone) must be set

with the same SSID, user name, and password as the access point.

1 ... 139 140 141 ... 212

No comments

Htc KII0160 User Manual Page 140