Htc Pro2 User Manual download pdf (Page 133)

Section 2J. Managing Your Device 123

Managing Your Device

4. Choose whether to install the program into the main memory or your storage card, if one is installed on

your device.

5. Wait for the installation to complete.

To install a program from your computer:

1. If the installer is an .exe file such as Setup.exe, the installer will probably need to be run on a computer.

Download or copy it to your computer.

2. Connect your device to your computer using the USB cable, and then double-click the installer file on

your computer to launch the installer.

3. Follow the onscreen instructions on your computer and your device to complete the installation.

To uninstall a program:

1. Tap Start > Settings > All Settings > System tab > Remove Programs.

2. In the Programs in storage memory list, select the program you want to remove, and then tap Remove.

Resetting Your Device

Soft Reset

Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active

program memory and shuts down all active programs. This can be useful when your device is running

slower than normal, or a program is not performing properly. A soft reset is also necessary after the

installation of some programs. If a soft reset is performed when programs are running, unsaved work will

be lost.

To perform a soft reset:

1. Pull out the stylus.

2. Remove the back cover. For instructions, see step 1 in “Installing the Battery” on page 2.

3. Use the stylus tip to press the Reset button located at the back of the device.

Your device restarts and displays the Home screen.

4. Replace the back cover and insert the stylus back into its compartment.

Note

You may be prompted to restart your device after installation is completed.

1 ... 132 133 134 ... 234

No comments

Htc Pro2 User Manual Page 133