HTC Wildfire User Manual download pdf (Page 142)

142 Camera

Taking a photo

1. On the main Home screen, tap Camera.

2. Before taking the photo, you can zoom in first on your subject. See “Zooming” to

find out how to use the onscreen zoom bar.

3. On the Viewfinder screen, tap the Flash button repeatedly to select a camera

flash mode depending on your lighting conditions:

Auto flash

Flash on

Flash off

4. Frame your subject on the Viewfinder screen.

5. Let the camera auto focus on the center of the screen, or you can touch another

area on the screen that you want to focus on.

6. Press the optical trackball to take the photo.

7. Choose what you want to do with the photo you’ve just taken. See “Review

screen“ for details.

Camera flash doesn’t turn on?

Using the flash eats up much battery power. To save battery power, the camera

disables the flash (even when you have set the camera flash mode to Auto flash or

Flash on) when one of the following occurs:

You have an incoming call

The flash will be disabled temporarily when you have an incoming call. After the

call ends, you’ll be able to use the flash again.

If you have set the flash to Flash on, it turns back on after you answer and end the

call.

Your phone’s battery level reaches 15% or lower

Recharge the battery so that the camera can have enough battery power to use

the flash.

Cold weather may lower battery performance which affects the flash

To make sure the camera has enough battery life to power up the flash, keep

your phone warm. When not in use, put the phone inside your jacket to keep

it warm, and try to avoid sudden temperature changes that may affect battery

performance.

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 201 202

No comments

HTC Wildfire User Manual Page 142