HTC Wildfire User Manual Page 197

  • Download
  • Add to my manuals
  • Print
  • Page
    / 202
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 196
197 Specifications
Specifications
CPU speed 528 MHz
Platform Android™ with HTC Sense™
Memory
ROM: 512 MB
RAM: 384 MB
Dimensions (LxWxT) 116.85 x 61 x 11.99 mm (4.6 x 2.4 x 0.47 inches)
Weight 115 grams (4.056 ounces) with battery
Display
3.2-inch touch-sensitive screen with 240 x 320 QVGA resolution
Network Dual-band (800 and 1900 MHz)
CDMA2000 1xRTT/1xEVDO/1xEVDO rev. A and IS-95A/B voice or
data with up to 1.8 Mbps upload and 3.1 Mbps download speeds
(Band frequency and data speed are operator dependent.)
Onscreen navigation Optical trackball
GPS Internal GPS antenna
Sensors G-Sensor
Digital compass
Proximity sensor
Ambient light sensor
Connectivity
Bluetooth® 2.1 with FTP/OPP for file transfer, A2DP for wireless
stereo headsets, and PBAP for phonebook access from the car kit
Wi-Fi®: IEEE 802.11 b/g
3.5 mm stereo audio jack
Standard micro-USB (5-pin micro-USB 2.0)
Camera 5 megapixel color camera with auto focus and flash
Audio supported
formats
Playback: .aac, .amr, .ogg, .m4a, .mid, .mp3, .wav, .wma
Recording: .amr
Video supported
formats
Playback: .3gp, .3g2, .mp4, .wmv
Recording: .3gp
Battery Rechargeable Lithium-ion battery
Capacity: 1300 mAh
Talk time: Up to 402 minutes
Standby time: Up to 300 hours
(The above are subject to network and phone usage.)
Expansion slot
microSD™ memory card (SD 2.0 compatible)
AC adapter Voltage range/frequency: 100 ~ 240V AC, 50/60 Hz
DC output: 5V and 1A
Special features Friend Stream, App Sharing
A Standby time specification (“specification”) is an industry standard that is only intended to allow
comparison of different mobile phones under the same circumstances. Power consumption in a
standby state is strongly dependent on factors including but not limited to network, settings, location,
movement, signal strength and cell traffic. Comparisons of different mobile phones using such a
specification can therefore only be done in a controlled laboratory environment. When using any mobile
phone in real life circumstances for which the mobile phone is intended, the standby time could be
considerably lower and will be strongly dependent on the factors as mentioned above.
Specifications are subject to change without prior notice.
Page view 196

Comments to this Manuals

No comments