HTC Wildfire User Manual download pdf (Page 134)

134 Bluetooth

2. If the Bluetooth check box is not selected, select it to turn Bluetooth on.

3. Make sure that the headset is discoverable.

4. Tap Scan for devices. Your phone will start to scan for Bluetooth devices within

range.

5. When you see the name of your headset displayed in the Bluetooth devices

section, tap the name. Your phone then automatically tries to pair with the

headset.

6. If automatic pairing fails, enter the passcode supplied with your headset.

The pairing and connection status is displayed below the hands-free headset or car

kit name in the Bluetooth devices section. When the Bluetooth headset or car kit is

connected to your phone, the Bluetooth connected icon is displayed in the status

bar. Depending on the type of headset or car kit you have connected, you can then

start using the headset or car kit to listen to music and/or make and receive phone

calls.

Reconnecting a headset or car kit

Normally, you can easily reconnect your headset by switching on Bluetooth on your

phone, and then turning on the headset. However, you might have to connect manually

if your headset has been used with another Bluetooth device.

From the Home screen, press MENU, and then tap Settings > Wireless &

networks > Bluetooth settings.

If the Bluetooth check box is not selected, select it to turn Bluetooth on.

Make sure that the headset is discoverable.

Tap the headset’s name in the Bluetooth devices section.

If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car kit

documentation to find the passcode.

If you still cannot reconnect to the headset or car kit, follow the instructions in

“Unpairing from a Bluetooth device”, and then follow the steps under “Connecting a

Bluetooth headset or car kit.”

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 201 202

No comments

HTC Wildfire User Manual Page 134