Htc Dash User Manual download pdf (Page 18)

12 Section 1: Getting Started

To install the battery:

1. Install the battery by inserting it with its exposed

copper part aligned with the protruding copper

conductor on the right side of the battery

compartment. Insert the right side of the battery ﬁrst,

and then gently push the battery into place.

2. Replace the back cover.

To remove the battery:

1. Make sure your device is turned off.

2. Remove the back cover.

3. To remove the battery, lift it up from the lower-left end

of the battery.

To charge the battery:

Some batteries perform best after several full charge and

discharge cycles. The time needed to fully charge the battery

is less than four hours. You can charge the battery in one of

the following ways:

Connect your device directly to an electrical outlet

using the AC phone charger.

Plug the sync cable to the USB port on your PC and to

the sync connector on your device.

Notes:

Do not remove the battery from the device while you are

charging it using the AC phone charger.

As a safety precaution, the battery stops charging when it

overheats.

1 ... 17 18 19 ... 158

No comments

Htc Dash User Manual Page 18