Htc WIZA100 User Manual download pdf (Page 101)

Getting Connected | 101

Set Up Your PC

Before using Modem Link, you must configure a new modem on the

PC, and obtain the APN (access point name) from your ISP (Internet

service provider). To connect through a USB port, you need to first set

up a USB modem on your PC. Before setting up a USB modem, verify

that you have the following files: USBMDM, USBModem_Dialer and

ActiveSync has been installed on PC. Both ﬁles are available on the

Getting Started CD.

To conﬁgure a USB modem on your PC, run the Getting Started CD

from the CD-ROM of your PC and do the following:

1. Connect your device to the PC using the USB cable.

2. On your device, tap Start > Programs > Modem Link.

3. Select USB as the connection type.

4. Tap Activate on the Modem Link screen of your device. The

“Found New Hardware” message appears on your PC.

5. On your PC, select Display a list of the known drivers for this

device so that I can choose a speciﬁc driver and click Next.

6. In the Hardware types list, select Modem and click Next.

7. Click Next.

8. Click Have Disk, it will try to ﬁnd the correct USB Modem driver

from Disk.

9. Click Next, then it complete.

10. Copy the USB Modem Dialer from the Getting Started CD to

your PC, then double-click the USB Modem Dialer.

11. Enter the GPRS settings (enter the APN assigned by your ISP).

12. Click Dial to start the connection.

1 ... 100 101 102 ... 192

No comments

Htc WIZA100 User Manual Page 101