HTC Diamond DIAM500 User Manual download pdf (Page 102)

94 Section 2H. Experiencing Multimedia

䢇 Shoot Option. The camera comes with an auto-focus feature that is activated when the Enter key is either

touched or pressed.

䡲 Touch and Press. Requires you to touch the Enter key to activate the auto-focus; when focus is set, press

the

Enter key to take the shot.

䡲 Touch. Requires you to touch the Enter key to activate autofocus; when focus is set, the camera

automatically takes the shot.

䡲 Full Press. Requires you to press the Enter key to activate auto-focus; when focus is set, the camera

automatically takes the shot.

䢇 Review Duration. Set a time length for displaying the captured image or video on the review screen. Select

No Limit if you do not want to impose a time limit. Select No Review to immediately return to the live camera

screen after capturing and saving.

䢇 Image Properties. This option lets you adjust the capture properties, such as Contrast, Saturation, and

Sharpness.

䢇 Effect. Choose a special effect such as Grayscale or Sepia to apply to your photos or video clips.

䢇 Metering Mode. Select a metering mode to allow the camera to measure the amount of light and calculate

the best-fit exposure value before capturing. Choose either Center Area to measure light using the center

area of the subject, or

Average to measure light using the area around the subject.

䢇 Prefix. When Default is selected as the prefix, the file name of each new captured file is set to “IMAGE” or

“VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You may also choose to name

files using either the current

Date or Date & Time as the prefix.

䢇 Counter. To reset the file naming counter back to 1, tap Reset.

䢇 Flicker Adjustment. When taking indoor shots, flicker on the camera screen may be caused by

inconsistencies between the vertical scan rate of the camera display and the flicker frequency of

fluorescent lighting. To reduce flicker, you can change the flicker adjustment setting to the proper

frequency (

50Hz or 60Hz) of the power in the country where your device is being used (60Hz throughout

the United States).

1 Tap a setting to adjust.

2 Tap

OK to save the settings.

3 Tap or , or press the Navigation Control right or left (landscape

orientation) to increase or decrease the value.

4 Tap

Cancel to close the submenu without applying and saving the changes.

5 Tap the

Reset icon to reset all properties to their default values.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 209 210

No comments

HTC Diamond DIAM500 User Manual Page 102