Htc Dash User Manual download pdf (Page 114)

 Flicker Adjustment. When taking indoor shots, ﬂicker

on the camera screen may be caused by inconsistencies

between the vertical scan rate of the camera display

and the ﬂicker frequency of ﬂuorescent lighting. To

reduce ﬂicker, you can change the ﬂicker adjustment

setting to the proper frequency (50Hz or 60Hz) of the

country where your device is being used.

 Record with Audio (in Video mode only). Select On to

record audio with the captured video clips, or select Off

to capture video without audio.

 Preﬁx. When Default is selected as the preﬁx, the ﬁle

name of each new captured ﬁle is set to “IMAGE” or

“VIDEO” followed by a sequential number, for example:

IMAGE_001.jpg. You may also choose to name ﬁles

using either the current Date or Date & Time as the

preﬁx.

Note:

If you set the Camera to save captured photos to a storage

card, the preﬁx cannot be selected. Captured photos will be

named using the convention IMAGnnnn.jpg (wherein ‘nnnn’

is the counter) which is the DCIM (Digital Camera Images)

naming standard, and will be saved to the \DCIM\100MEDIA

folder on the storage card.

 Counter. To reset the ﬁle naming counter back to 1, tap

Reset.

 Recording Limit (in Video mode only). Set the duration

or ﬁle size for recording video.

 Template Folder (in Picture Theme mode only). By

default, templates are stored in the \My Documents\

Templates folder on the device’s Main Memory. If you

transferred some templates to a storage card (via File

Explorer), set this option to Main + Card to specify that

templates are located in both the main memory and

the storage card.

108 Section 11: Experiencing Multimedia

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 157 158

No comments

Htc Dash User Manual Page 114