HTC PM-128 User Manual download pdf (Page 3)

4. Thread the (5) Lock Knobs  into their respective threaded holes.

5. Slip the Central Support/Drill Tray Assembly  into the adapter tube

of the Column Clamp  and tighten the Locking Knob.

6. Slip the Extensions into the Central Support Assembly and tighten

with Lock Knobs.

7. Slide the Roller Support Brackets into the vertical sockets of the

Extensions and tighten with Lock Knobs.

8. Install Rollers into the Roller Support Brackets by inserting the fixed

end of the roller axle into the roller axle hole and then depress (with

a screwdriver or putty knife) the other end of the axle and slip it into

place until the end of the axle pops into the hole.

9. Adjust the height of the Roller Bracket so the top of the rollers are

even with the drill press table. Move extensions in and out as desired

to support your workpiece. To save space and reduce obstructions in

your shop, keep supports pushed in as far as possible when not in use.

Parts List

Qty Description Part No.

 1 Column Clamp Strap 2616

 1 Column Clamp/Adapter 2617

 1 Central Support/Drill Tray 2618

 2 Extension 2792

 2 Roller Support Bracket - T 2621

 2 10" Roller 2031

 1 Column Anchor Bolts 5/16"-18x4" C307

 1 Locking Nut 5/16"-18 ESNA C201

 1 Threaded Knob 2622

 5 Lock Knob G101

CAUTION: Observe all safety instructions and warnings regarding

the safe use of this accessory support and your drill press.

1 2 3 4 5 6

No comments

HTC PM-128 User Manual Page 3