Htc 110163 / CZ38 User Manual download pdf (Page 7)

7

ASSEMBLY

NOTE: Before mounting your new bagger

you will have to remove the mower’s utility

box and rear guard.

2

MOWER DECK BAFFLE

(See Figure 2.)

1. Raise your mower deck to its highest posi-

tion.

2. Install the hex bolt, and locknut through

mower deck baffle and tighten securely.

FIGURE 2

1

REMOVAL OF UTILITY BOX, AND

REAR GUARD (See Figure 1.)

1. Remove the hairpins and clevis pins that

secure the utility box to the unit (all four

corners).

2. Using a 1/2” wrench, remove the six bolts

that secure the rear bracket to the unit.

FIGURE 1

REAR BRACKET

BOLTS

3

INSTALLATION OF THE REAR GUARD,

PLATE AND HANGER

(See Figure 3A and 3B.)

1. Using the 6 bolts removed from the rear

bracket, install the new rear bracket (Part No.

110485).

2. Place the hanger over the tab on the plate.

See Figure 3A.

FIGURE 3A

3. Using the four bolts (HCS 3/8 x 3/4) and nyloc

nuts (3/8), install the plate to the rear bracket

and front bracket.

4. Secure the hanger to the rear bracket with

two bolts (HCS 5/16 x 3/4) and nyloc nuts

(5/16). See Figure 3B.

FIGURE 3B

HEX BOLT

LOCKNUT

MOWER

DECK

BAFFLE

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments