Htc 110163 / CZ38 User Manual download pdf (Page 10)

10

ASSEMBLY

9

HOSE

(See Figures 9A and 9B)

1. Place both clamps over the hose.

2. Slide the hose over the inlet at the top end.

3. Slide the hose over the lower chute inlet.

4. Remove any twists in the hose by rotating it

at the top or bottom end.

5. Tighten the clamps.

FIGURE 9A

COVER

HOSE

LOWER

CHUTE

8

LOWER CHUTE

(See Figure 8)

1. Raise and hold deflector shield in upright

position.

2. Place slot in lower chute over tab on mower

deck and position lower chute over deck

opening as shown.

3. Hook rear latch into flange hole on back of

mower deck.

4. Hook front latch into tab hole on front of

mower deck.

FIGURE 8

CAUTION

Before raising deflector shield, turn mower

engine off. DO NOT remove deflector shield

from mower. Raise and hold shield when at-

taching lower chute and allow it to rest on

chute while in operation.

DEFLECTOR

SHIELD

MOWER

DECK

BAFFLE

HEX BOLT

WASHER

WING NUT

FIGURE 9B

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments